Gear Ratio

Gear ratio is a gear transmission can continue the power of the crankshaft which is then transmitted to the output shaft or gear chain. With this gear ratio so it can be done low-speed gearshift from a high speed or vice versa.

MACHINE WORK PRINCIPLE TWO STROKE

The first step of TMB piston moves toward TDC, when torak climbed up on the fuel intake hole this open and sucked fuel from the carburetor into the room crank tub on the bottom of the piston. At the same time flushing hole and the pit closed by the piston body.

Basic Technique Learning AUTOCAD

To learn basic techniques to learn autocad course you must know first what is the use of autocad and to what is autocad.

MACHINE WORK PRINCIPLE FOUR STEP

1. Step blotting

Is a step-sucking fuel from the carburetor into the cylinder bore, at this step piston (piston) moves from theTMA (top dead point) to TMB (bottom dead point) and at the same time intake valve opens and the exhaustvalve is closed so that the fuel was sucked in. into the engine / compression.