The main part of motorcycle

A motorcycle can be called reasonable or feasible to operate starlings since it is supported by several major units that make up a working system. This system then allows the motorcycle can be operated either on the highway. The main part is composed of : 

1. Engine

 








2. Electrical



 
3. Chassis
Chassis is divided into several sections :
a. Frame
b. Power Train
c. Steering
d. Suspension
e. Brake
f. Body

Ninja Radiator Maintenance

Periodic treatments actual ninja radiator clearly contained in the manual book that obtained from dealers. Usually water radiator was replaced after reaching 10,000 km or more.

Dewy Carburetor

       carburetor can indeed dewy, similar to the water bottle filled with cold water. This can happen because the capacity of gasoline storage tanks inside the carburetor excessively, thus creating cooler temperatures and reached the outside of the carburetor in the form of beads of dew.

CRANk PARTS IN MOTORCYCLE

The parts of the crank:
1. Houses crank
2. Pen crank
3. Cushion

CYLINDER ENGINE TWO STROKE

In addition to the cooling fins on the engine block cylinder two stroke engine there are holes others:

1. Inlet (inlet port)
The hole where the flow of fuel from the carburetor into the room on the vessel at the bottom of the crank piston position. The inlet is located on the cylinder block is reserved for two-step machine with piston valve system (piston is fully functional as a valve entrance).